FAQ for the mileage adjusting tool Diagprog

Helpfull questions and answers around the topic Diagprog3 speedo adjustment and odo repair 

Questions and answers around the topic Diagprog Tachoprogrammer

Question:
Does the device DIAGPROG3 only change the mileage?
Answer:
The device have more several possibilities. The device can change the service intervall at VAG Model. Further it is possible to erase error in the memory modules at most models. Sometimes the mileage is not only store inside the speedometer. The DIAGPROG speedometer mileage tool can change also the mileage in other control devices and modules. A program for reading and storing of several data records is contained in the DIAGPROG System.

Question:
How much will cost an update and is it possible to get an update via Internet?
Answer:
It will be possible to make an update 24 hours a day. This will be free all time. If there is new software coming out you will see it in the display of the Diagprog. This file is decoded and it is useless. For an existing software the update is free of charge. For a new software the update is payable the costs for the DP3.
The prices for an update varies between 50 and 200 Euro. That cost varies according to a motor vehicle type and the degree of development costs. Several motor vehicle types can be activated in a package and are available in a lucrative lump-sum price. Also a year update is available.
The communication programm of a  Diagprog Systems is contained in every package. The program is not limited and it is possible to install the software in a computer or laptop. An update can be download every time. The server is online 24 hours a day. If an payable update is wanted, around vehicle-technical to get the newest status, an activation code is sent via mail after payment. This activation unlock the file by itself.

Question:
How do I know and get info about a new update?
Answer:
If a Diagprog System is bought in our house, your data are save and you are added automatic a mailing list. So you are always on the most current state. Also information about new updates you will get from our website at:
NEWS AND UPDATES

Question:
How does a speedometer adjustment works and how does I know which cable and which instruction must be used?
Answer:
A speedometer adjustment is carried out over the interface OBD2, about the speedometer diagnosis or above the Eprom or the processor. The programming kind depends on the software in the speedometer.
If the Diagprog System is put under power, the single vehicles can be dialed by a Touchscreendisplay. The manufacturers are split in models and years of manufacture. If a vehicle was selected, the instruction file with PDF number is indicated. Now the Instruction CD that is to contain also in the delivery program must be chose by the indicated PDF file of the Diagprog. In the same way the cable appertaining to the programming is stipulated. The cables are numbered.

Question:
Is it possible to get a  training in the case of a purchase the Diagprog Systems?
Answer:
If you buy a Diagprog Systems in our house the introduction is made by our house. The cables are sort out by a list and the cable list is given afterwards to the buyer. The handling will be explained in all details, that the full potential of the Diagprog Systems can be emptied. Also it will be possible to get  a training in our mileage adjusting -department. All steps and helpful tips during the speedometer adjustment are informed at this training.

Question:
If I have got problems during the programming of a speedometer or other support, how will I receive it?
Answer:
At the purchase of a Diagprog3 System you will get a telephone number and an
E-mail address for a professional support.


Question:
If I have lost the instructions for speedometer adjustment, how one can get these?
Answer:
If the unit is bought in our house please contact us. to We will send you the missing instructions to you, or it will be possible to download the instructions for speedometer adjustment from our server.


Question:
Must I send a defect Diagprog System for repair?
Answer:
The Diagprog tacho programmer have got a self-test inside. All drivers in the device can be tested for this way. The menu item will be found under ATTITUDES. All lines for a programming can be test in the device.


Diagprog Tachoprogrammer - helpfull question and answer